TECHWIKI.TK

Breaking News

Sunday, July 24, 2011

Locking and Restricting the Registry in Windows XP Part II

Info Post

12:35 AM

Revised and expanded version This article applies to: Windows 2000/XP/Server 2003 Topics on this page: [3] Regedit disabled: Sol...

Locking and Restricting the Registry in Windows XP Part I

Info Post

sreekumar

12:34 AM

No Comment

Revised and expanded version This article applies to: Windows 2000/XP/Server 2003 Topics on this page: [1] Introduction: ...

Thursday, June 16, 2011

WAP browsers for Windows

Info Post

sreekumar

8:47 PM

No Comment

WAP browsers for PC

WAP BROWSING ON WINDOWS If you are using internet on your mobile phone ,you may have probably visited wap sites which are web sites exclu...

Subscribe to: Posts (Atom)

Will A USB Port be burnout?

Will a usb port burn out as a result of the over current drawn from device?

The answer is NO.

The specification defines a low-power device as one that draws up to 100 milliamperes from the bus, and a high-power device as one that draws up to 500 milliamperes from the bus. A high-power device can't draw more than 100 milliamperes until the host has said it's OK to do so.

All hubs have over-current protection that prevents excessive current from flowing to a device. If you connect a high-power device to a low-power hub, Windows will display a message informing you that the hub doesn't have enough power available and offering assistance. If the bus has a low-power device connected to a high-power port, Windows will recommend swapping the device with the

high-power device (Figure1)

Figure 1: Windows warns users when they connect a high-power device to a

low-power hub, and helps them find an alternate connection.

Powering options for hubs are similar to those for other devices. all hubs except the root hub are self-powered or buspowered.The root hub gets its power from the host. If it supplies 100 milliamperes, the hub is defined as a low-power hub. High power root hub is capable of supplying 500 milliamperes to each port on the hub. Bus-powered hubs are limited. All of a bus-powered hub's downstream devices must be low power. A self-powered hub may also draw up to 100 milliamperes from the bus. When the port circuits on a hub detect an over-current condition, they limit the current at the port and the hub informs the host of the problem. Windows warns the user when a device

exceeds the current limits of its hub port (Figure 2).

Figure 2: When a device exceeds the current limit of its hub's port, Windows

warns the user and offers assistance.

TECHWIKI.TK

Locking and Restricting the Registry in Windows XP Part II

Locking and Restricting the Registry in Windows XP Part I

WAP browsers for Windows

Blog Archive

Popular Posts

Arsip Blog